Afișez toate cele 20 de rezultate

  • Substituent

    Optimizator Huawei 450-P2 – New

    Huawei Smart SUN2000-450W-P2 Optimizer – General Data Dimensions (W x H x D): 71 x 138 x 25 mm (2.8 x 5.4 x 1.0 in.) Weight (including cable): 0.55 kg Installation part (optional): Grounding plate, grounding clamp, PV module frame plate Input connector: Staubli MC4 Output connector: Staubli MC4 Length of output cable4: 1.2 m Operating temperature5: -40 +85 Humidity range: 0% RH 100% RH Protection class: IP68Huawei Smart SUN2000-450W-P2 Optimizer – Input Rated input power1: 450 W Absolute maximum input voltage: 80 V MPPT operating voltage range: 10 – 80 V Max. Input Current: 14.5 A Max. Efficiency: 99.5 % Weighted efficiency: 99.0 % Overvoltage category: IIHuawei Smart SUN2000-450W-P2 Optimizer – Output Max. Output voltage: 80 V Max. Output current: 15 A Output bypass2: Yes Output voltage switch-off per optimiser30 V Output impedance at switch-off per optimiser: 1 k ohm ± 10%.Huawei Smart SUN2000-450W-P2 Optimizer – Output Max. Output voltage: 80 V Max. Output current: 15 A Output bypass2: Yes Output voltage switch-off per optimiser30 V Output impedance at switch-off per optimiser: 1 k ohm ± 10%.Long String Design (Full Optimizer) SUN2000-2-6-KTL-L1: 4 – 25 | 6,000 W SUN2000-3-10KTL-M1: 6 – 35 | 10,000 W SUN2000-12-20KTL-M2: 6 – 35 | 12,000 W SUN2000-30-40 KTL-M3: 6 – 25 | 12,000 WHuawei Smart SUN2000-450W-P2 Optimizer – Communication Protocol Communication protocol: MBUSHuawei Smart SUN2000-450W-P2 Optimizer – Standards Compliance Safety: IEC62109-1 (Safety Class II) RoHS: YesHuawei Smart SUN2000-450W-P2 Optimizer – Inverter – Compatibility Compatible product: SUN2000-2 / 3 / 3.68 / 4 / 4.6 / 5 / 6 KTL-L1 SUN2000-3 / 4 / 5 / 6 / 8 / 10 KTL-M1 SUN2000-12 / 15 / 17 / 20 KTL-M2 SUN2000-30 / 36 / 40 KTL-M3Huawei Smart SUN2000-450W-P Optimizer – Notes and Explanations 1 In the STC environment, the rated power of the module must not exceed 1.05 times the input rated power of the optimiser.2 The power optimiser is bypassed in a string connected to an inverter in operation when it is not working.3 OVdc output of the power optimiser when the connection to the inverter is disconnected or the inverter is switched off.4 Enables installation of PV modules in frame/installation/extruded aluminium profiles5 Fits PV module in landscape and portrait installation.6 Requires standard 60 cell module to meet minimum inverter start voltage.7 Full performance refers to the intelligent online design tool.

    Huawei Smart SUN2000-450W-P2 Optimizer - General Data Dimensions (W x H x D): 71 x 138 x 25 mm (2.8 x 5.4 x 1.0 in.) Weight (including cable): 0.55 kg…
  • Invertor Huawei 6KW – Trifazat – hibrid wlan integrat

    Invertor Huawei 6KW – Trifazat – hibrid wlan integrat

    3-phase WR with 6.600VA power output2 independent MPP trackers1 battery connection (Plug and Play) for LUNA2000 ESS 5-15kWhEfficiency up to 98.6%Compatible with module optimizer SUN2000-450W-PCommunication via WLAN / Ethernet and 4G/LTE*Free system monitoring with FusionSolarRS485 for Smart Power Sensor and LUNA2000 ESS 5-15kWhIntegrated AC and DC overvoltage protection TYPE IIIntegrated PID recoveryConvection coolingProtection class IP65Huawei SUN2000-6KTL-M1 – General Specifications Operating Temperature Range: -25~+60°C Operating Relative Humidity: 0%RH~100%RH Operating Altitude: 0~4000m (Derating >2000m) Cooling: Convection Cooling Display: LED Display Communication: RS485, WiFi, Ethernet via Smart Dongle WiFi FE; 4G/3G/2G via Smart Dongle 4G (optional) Weight (including mounting bracket): 17 kg Dimensions (including mounting bracket): 525 x 470 x 146.5 mm Protection class: IP65 Energy consumption at night: < 5.5 W (<10 W, when PID recovery function is enabled)Huawei SUN2000-6KTL-M1 – Input (DC) Recommended maximum PV power9,000 Wp Max. Input voltage: 1.100 V Operating voltage range : 140 V ~ 980 V Starting voltage : 200 V Rated input voltage : 600 V Max. Input current per MPPT: 11 A Max. Short circuit current: 15 A Number of MPP trackers: 2 Max. Number of inputs per MPPT: 1Huawei SUN2000-6KTL-M1 – Input (DC Battery) Compatible battery: HUAWEI Smart String ESS 5kWh – 30kWh Operating voltage range: 600 V ~ 980 V Maximum operating current: 16 A Maximum charging power: 10,000 W Maximum discharge power: 6,600 WHuawei SUN2000-6KTL-M1 – Output (On Grid) Mains connection: Three-phase Rated power: 6,000 W Maximum apparent power: 6,600 VA Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE AC mains frequency: 50 Hz / 60 Hz Maximum output current: 10.1 A Adjustable power factor: 0.8 cap. … 0.8 ind. Total harmonic distortion (THD): ≤ 3%Huawei SUN2000-6KTL-M1 – Output (Backup Power via Backup Box-B1) Maximum apparent power: 3,300 VA Rated output voltage: 220 V / 230 V Maximum output current: 15 A Adjustable power factor: 0.8 cap. … 0.8 ind.Huawei SUN2000-6KTL-M1 – Protection and function DC load break switch: Yes Islanding detection: Yes DC reverse polarity protection: Yes Insulation monitoring: Yes DC overvoltage protection: Yes, compatible with protection type TYPE II according to EN / IEC 61643-11 AC overvoltage protection: Yes, compatible with protection type TYPE II according to EN / IEC 61643-11 Residual current monitoring: Yes AC overcurrent protection: Yes AC short-circuit protection: Yes Arc detection: Yes Inputs for ripple control receivers: Yes Integrated PID recovery: Yes Battery charging from mains possible: YesHuawei SUN2000-6KTL-M1 – Module Optimizer DC MBUS compatible optimizer: SUN2000-450W-PHuawei SUN2000-6KTL-M1 – Standards Compliance (others available upon request) Safety standards: EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116 Mains connection standards: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWAHuawei SUN2000-6KTL-M1 – included in delivery PV Connectors Battery connectors AC connectors Signal cable connector Bracket WLAN-FE-Dongle

    3-phase WR with 6.600VA power output2 independent MPP trackers1 battery connection (Plug and Play) for LUNA2000 ESS 5-15kWhEfficiency up to 98.6%Compatible with module optimizer SUN2000-450W-PCommunication via WLAN / Ethernet and…
  • Substituent

    Smart Dongle 4G – Huawei

    – – ATENTIE – – SE LIVREAZA DOAR IMPREUNA CU INVERTOR !! Plug in, connect, done – the Huawei Smart DongleA-03 4G is installed very quickly via PlugandPlay. The connection is made via USB, which is also a particularly simple solution. The dongle enables the connection of the inverter to the Huawei FusionSolar Smart PV Management System. In total, the Huawei dongle supports the connection of a maximum of 10 devices. Supported standards include 2G, 3G, and 4G, so communication is possible wirelessly almost anywhere – Huawei recommends using it whenever reception is stable. In terms of operation, there are otherwise hardly any restrictions. The dongle operates in the temperature range of -30 °C to +65 °C and tolerates relative humidities of 5% to 95%. The dongle is protected according to protection class IP65 and has a power consumption of 3.5 watts.Once correctly connected, the module provides direct feedback to the operator via LED indicator – this is useful not only during commissioning. The compact design of the Huawei Smart DongleA-03 4G should be mentioned; including the housing, the device measures only 130 x 48 x 33 mm with a weight of 90 g. Compatibility with the inverter is essential for smooth operation. The Huawei Smart DongleA-03 4G presents itself here with a long list of supported models from the SUN2000 series. Installation and operation succeed without effort, yet the smart technology offers a high added value.Max. 10 supported devicesConnection interface USBPlug-and-play installationDisplay LED – IndicatorHuawei Smart DongleA-03 4G – General SpecificationsMax. supported devices: 10 Connection interface: USB Installation: Plug-and-play Display: LED – indicator Dimensions (W x H x D): 130 x 48 x 33 mm Weight: 90 g Protection class: IP65 Power consumption (typical): 3.5 WHuawei Smart DongleA-03 4G – WLAN ParametersSIM card type: Mini-Sim (15 mm x 25 mm) Supported standards and frequencies3: 4G: FDD-LTE / TDD-LTE 3G: WCDMA / HSDPA / HSUPA / HSPA+ 2G: GSM / GPRS / EDGE Huawei Smart DongleA-03 4G – EnvironmentOperating temperature range: -30 to +65 Relative humidity in operation: 5 – 95% RH Storage temperature range: -40 to +70 Max. Operating altitude: 4000 mHuawei Smart DongleA-03 4G – Standards ComplianceCertificate: CEHuawei Smart DongleA-03 4G – Inverter CompatibilityInverter model: SUN2000-2/3/3.68/4/4.6/5/6KTL-L1 SUN2000-3/4/5/6/8/10KTL-M0 Sun2000-12/15/17/20KTL-M0 SUN2000-60KTL-M0 SUN2000-100KTL-M1Huawei Smart DongleA-03 4G – Notes and explanations

    - - ATENTIE - - SE LIVREAZA DOAR IMPREUNA CU INVERTOR !! Plug in, connect, done - the Huawei Smart DongleA-03 4G is installed very quickly via PlugandPlay. The connection…
  • Substituent

    Acumulator Huawei LUNA2000-5-E0, 5kWh

    Tip acumulator: LifePo4Curent maxim de iesire: 2.5 kWTensiune nominala: 360 VTensiune de functionare: 350 – 560 VDOD: peste 90 %Grad de protectie: IP66Temperatura de functionare: -10°C – +55°CDimensiuni: 67.0 × 36.0 × 15.0 cmGreutate: 50 KgGarantie : 10 ani

    Tip acumulator: LifePo4Curent maxim de iesire: 2.5 kWTensiune nominala: 360 VTensiune de functionare: 350 - 560 VDOD: peste 90 %Grad de protectie: IP66Temperatura de functionare: -10°C - +55°CDimensiuni: 67.0 ×…
  • Substituent

    Smart Meter 176-288V – 100A – 1 Fază – Huawei

    – – ATENTIE – – SE LIVREAZA DOAR IMPREUNA CU INVERTOR !! Senzorul de putere Huawei DDSU666-H este un senzor de curent monofazat pentru conectarea la invertor. Este usor de utilizat si de citit daqtorita ecranului LCD încorporat. În plus, componenta accepta comunicarea prin RS485, astfel încât valorile masurate pot fi evaluate si la distanta. Punerea în functiune a senzorului de curent pentru sistemele fotovoltaice este simpla si sigura – expertul digital va ghideaza prin procesul de integrare. Odata instalata printr-un singur clic, componenta îndeplineste cele mai înalte cerinte. Senzorul inteligent de putere DDSU666-H este proiectat pentru utilizare la nivel industrial si este deosebit de fiabil.Datele tehnice ale senzorului sunt, de asemenea, importante. Consumul propriu de energie este mai mic de un watt – astfel încât dispozitivul functioneaza fara a consuma cantitati mari din energia produsa. Temperatura de functionare este cuprinsa între -25 °C si +60 °C si umiditatea relativa poate fi de la 5 % la 95 %.Dimensiunile de numai 100 x 36 x 65,5 mm îl fac usor de amplasat oriunde. Este montat pe sina DIN35 top-hat. Tensiunea de intrare este de 176 VAC~288 VAC (faza / N). În functionare, Senzorul Smart Power DDSU666-H atinge o precizie de masurare de +/-1 % (curent, putere si energie) si +/-0,01 Hz (frecventa). Senzorul de curent apartine astfel clasei de precizie >1.Se livreaza cu accesoriile necesare, adica un transformator de curent pliabil cu lungimea cablului de 5 m si un cablu RS485 cu lungimea de 10 m.Senzor inteligent de putere monofazatTensiune 176-288 VoltiClasa de precizie > 1Operare usoara prin afisaj LCDConsum de energie ≤1 WComunicare prin RS485Senzor de putere inteligent Huawei DDSU666-H – Date generaleInterval de temperatura de functionare: -25°C ~ +60°CUmiditate relativa: 5 % RH~ 95 % RHDimensiune (L x A x A): 100 x 36 x 65,5 mmTip de montare: sina DIN35Greutate (inclusiv cablu): 1,2 kgTip sistem de alimentare: 1P2W (1-fazat)Tensiune de intrare: 176 VAC~288 VAC (faza / N)Consum de energie: ≤ 0,8 WComunicare: RS485Senzor de putere inteligent Huawei DDSU666-H – ComunicareInterfata: RS485Rata de transmisie: 9.600 bpsProtocol de comunicare: Modbus-RTUSenzor de putere inteligent Huawei DDSU666-H – Domeniu de masurareTensiune de faza: 176 Vac ~ 288 VacCurent: 0 ~ 100 A

    - - ATENTIE - - SE LIVREAZA DOAR IMPREUNA CU INVERTOR !! Senzorul de putere Huawei DDSU666-H este un senzor de curent monofazat pentru conectarea la invertor. Este usor de…
  • Substituent

    Invertor Huawei 3KW – Trifazat – hibrid wlan integrat

    Invertor trifazat cu putere de iesire de 3.300 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,2%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare prin WLAN / Ethernet si 4G/LTE*Monitorizare gratuita a sistemului cu FusionSolarRS485 pentru senzor de putere inteligent si LUNA2000 ESS 5-15 kWhProtectie integrata la supratensiune CA si CC TIP IIRecuperare PID integrataRacire prin convectieClasa de protectie IP65 Huawei SUN2000-3KTL-M1 specificatii generaleInterval de temperatura de functionare: -25~+60°CUmiditate relativa de functionare: 0%RH~100%RHAltitudine de functionare: 0 ~ 4000 m (degradare > 2000 m)Racire: Racire prin convectieAfisaj: Afisaj LEDComunicare: RS485, WiFi, Ethernet prin Smart Dongle WiFi FE; 4G/3G/2G prin Smart Dongle 4G (optional)Greutate (inclusiv suport de montare): 17 kgDimensiuni (inclusiv suport de montare): 525 x 470 x 146,5 mmClasa de protectie: IP65Consum de energie pe timp de noapte: < 5,5 W (<10 W, când functia de recuperare PID este activata) Huawei SUN2000-3KTL-M1 – Intrare (CC)Puterea fotovoltaica maxima recomandata 1 : 4.500 WpTensiune maxima de intrare 2 : 1.100 VDomeniu de tensiune de functionare 3 : 140 V ~ 980 V Tensiune de pornire: 200 VTensiune nominala de intrare: 600 VCurent de intrare maxim per MPPT: 11 ACurent de scurtcircuit: 15 ANumar de trackere MPP: 2Numarul de intrari per MPPT: 1 Huawei SUN2000-3KTL-M1 – Intrare (CC Baterie)Baterie compatibila: HUAWEI Smart String ESS 5kWh – 30kWhGama de tensiune de functionare: 600V ~ 980VCurent maxim de functionare: 16APutere maxima de încarcare:10.000W Putere maxima de descarcare: 3.300W Huawei SUN2000-3KTL-M1 – Iesire (în retea)Conexiune la retea: trifazatPutere nominala: 3.000 WPutere aparenta maxima: 3.300 VA nominalTensiune de iesire: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PEFrecventa liniei AC: 50 Hz / 60 HzCurent maxim de iesire: 5,1 AFactor de putere reglabil: 0,8 cap. … 0,8 ind.Distorsiunea armonica totala (THD): ≤ 3% Huawei SUN2000-3KTL-M1 – Iesire (alimentare de rezerva prin Backup Box-B1)Putere aparenta maxima: 3.300 VATensiune nominala de iesire: 220 V / 230 VCurent maxim de iesire: 15 AFactor de putere reglabil: 0,8 cap. … 0,8 ind. Huawei SUN2000-3KTL-M1 – functionare si protectieComutator CCDetectarea reteleiProtectie la inversia de polaritate CCMonitorizarea izolatieiProtectie la supratensiune CC, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Protectie la supratensiune CA, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Monitorizare curent rezidualProtectie la supracurent CAProtectie la scurtcircuit CADetectare arcReceptor de control al ondulatiei pe intrariRecuperare PID instalataÎncarcarea bateriei de la retea posibila Huawei SUN2000-3KTL-M1 – modul de optimizareOptimizator compatibil CC MBUS: SUN2000-450W-P Huawei SUN2000-3KTL-M1 – Respectarea standardelor (altele disponibile la cerere)Standarde de siguranta: EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116 Standarde de conectare la retea: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWAHuawei SUN2000-3KTL-M1 – Continutul cutieiConector PV Conector baterie Conector AC Conector cablu de semnal Suport WiFi Dispozitiv FE Huawei SUN2000-3KTL-M1 – Note1 Puterea maxima de intrare PV a invertorului este de 20.000 Wp atunci când instalatiile sunt proiectate si complet conectate cu optimizatoarele de putere SUN2000-450-P.2 Tensiunea maxima de intrare este limita superioara a tensiunii continue. Orice tensiune de intrare CC mai mare ar putea deteriora invertorul.3 Orice tensiune de intrare CC peste intervalul de tensiune de functionare poate provoca o functionare eronata.

    Invertor trifazat cu putere de iesire de 3.300 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,2%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare…
  • Substituent

    Backup Box-B1 Trifazat

    The Huawei Backup Box-B1 for the single-phase household grid ensures that your loads are supplied even in the event of a power failure. In combination with the M1 inverter series, the Backup Box enables emergency power operation in the event of a grid failure. The installation and operation of the Backup Box for solar systems is very straightforward. The device supports communication with the inverter simply by means of a digital input.On-site installation is simple and safe. The device is protected against weather and environmental influences on site according to IP65. It can be operated in a range from -20°C to +45°C – in other words, in just about any plant. The dimensions of 400 x 350 x 130 mm are compact, so there are no space problems. The entire device weighs 11 kg. The single-phase output power of the B0 variant is 3,300VA.For 380/400V networksSingle-phase emergency power output3.300VA outputCompact deviceHuawei Smart Backup Box-B1 – General SpecificationsOperating temperature range: -20 to +45 °C Relative humidity during operation: 0 % RH to 100 % RH Dimensions (W*H*D) : 400 x 350 x 130 mm Weight: 11 kg Protection class: IP 65Huawei Smart Backup Box-B1 – AC Output (Mains Powered)Mains connection: Three-phase Operating voltage: 380 V / 400 V AC mains frequency: 50Hz / 60Hz AC voltage range: 342 V ~ 440 VHuawei Smart Backup Box-B1 – AC Output (Backup)Load connection: Single -phase Rated voltage: 220 V / 230 V AC frequency: 50Hz / 60Hz Maximum apparent power: 3300 VA Maximum output current: 15.2 A Switching time: < 3 sec.Huawei Smart Backup Box-B1 – AC Input (Inverter)Rated voltage: 380 V / 400 V AC frequency: 50Hz / 60 Hz Compatible inverters: SUN2000-/3/4/5/6/8/10KTL-M1

    The Huawei Backup Box-B1 for the single-phase household grid ensures that your loads are supplied even in the event of a power failure. In combination with the M1 inverter series,…
  • Substituent

    Invertor Huawei 3KW – Monofazat- hibrid -Wifi integrat

    1-phase inverter with 3,300VA output 2 independent MPP trackers 1 battery connection (plug and play) Efficiency up to 98.3% Communication via WLAN, Ethernet* and 4G* RS485 for Smart Power Sensor and Battery AC and DC overvoltage protection Huawei SUN2000-3KTL-L1 – General Specifications Operating temperature range: -25 ~ +60 °C Relative operating humidity: 0 % RH~100 % RH Operating altitude: 0 – 4,000 m (derating > 2,000 m) Cooling: Natural convection Display: Status LEDs Communication: RS485, WLAN, Ethernet*, 4G/3G/2G* Weight (incl. mounting bracket): 12 Kg Dimensions (incl. mounting bracket): 365 x 365 x 156 mm Protection class: IP65 Huawei SUN2000-3KTL-L1 – Input DC Recommended maximum PV power1: 4,500 Wp Max. Input voltage2: 600 V Starting voltage: 100 V Full MPPT voltage range2: 90 V ~ 560 V (1) Rated input voltage: 360 V Max. Input Current per MPPT: 12.5 A Max. Short-circuit current: 18 A Number of MPP trackers: 2 Max. number of inputs: 2 Number of inputs: 2 Huawei SUN2000-3KTL-L1 – Output AC Mains connection: Single-phase Rated power: 3,000 W Max. Apparent power: 3,300 VA Rated output voltage: 220 V / 230 V / 240 V AC – Mains frequency: 50 Hz / 60 Hz Max. output current: 15 A Output current: 15 A Adjustable power factor: 0.8 kap. … 0.8 ind. Distortion factor (THD): ≤ 3% Huawei SUN2000-3KTL-L1 – Efficiency Max. Efficiency: 98.3 % European efficiency: 97.3 % Huawei SUN2000-3KTL-L1 – Protection devices DC load break switch: Yes DC reverse polarity protection: Yes AC overcurrent protection: Yes AC short circuit protection: Yes Overheating protection: Yes Arc fault protection: Yes DC overvoltage protection4: Yes AC overvoltage protection4: Yes DC insulation monitoring: Yes Residual current monitoring: Yes Huawei SUN2000-3KTL-L1 – Battery Compatibility Compatible Battery: LG Chem RESU 7H_R / 10H_R Voltage Range: 350 ~ 450 Vdc Max. Current: 10 A Max. Discharge Power: 3,300 W Compatible Battery: HUAWEI Smart ESS Battery 5 kWh – 30 kWh 1 Operating voltage range: 350 ~ 560 VDC Max. Operating current: 15 A Max. Charging power3: 5.000 W Max. Discharge power: 3,300 W Huawei SUN2000-3KTL-L1 – Standards and Security EN/IEC 62109-1, EN/IEC 62109-2 Huawei SUN2000-3KTL-L1 – Power supply conditions G98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777.2, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116 Further information on conformity to standards is available on request. Huawei SUN2000-3KTL-L1 – Optimizer Compatibility DC MBUS compatible optimizer: SUN2000-450W-P Huawei SUN2000-3KTL-L1 – included in delivery PV Connector Battery Connector AC Connector Signal Cable Connector Antenna Bracket Huawei SUN2000-3KTL-L1 – Notes and explanations 1 The maximum PV input power of the inverter is 10000 Wp when long strings are designed and fully connected to the SUN2000-450W-P power optimizers. 2 The maximum upper limit for input voltage and operating voltage is reduced to 495 V when the inverter is connected and operates with the LG battery . 3 2500 W @ 5kWh HUAWEI ESS Battery 4 compatible with protection type TYPE II according to EN / IEC 61643-11 * via WLAN-FE dongle / 4G dongle (optional)

    1-phase inverter with 3,300VA output 2 independent MPP trackers 1 battery connection (plug and play) Efficiency up to 98.3% Communication via WLAN, Ethernet* and 4G* RS485 for Smart Power Sensor…
  • Backup Box-B0 Monofazat

    Backup Box-B0 Monofazat

    The Huawei Backup Box-B0 for the single-phase household grid ensures that your loads are supplied even in the event of a power failure. In combination with the L1 inverter series, the Backup Box enables emergency power operation in the event of a grid failure. The installation and operation of the Backup Box for solar systems is very straightforward. The device supports communication with the inverter simply by means of a digital input.On-site installation is simple and safe. The device is protected against weather and environmental influences on site according to IP65. It can be operated in a range from -20°C to +45°C – in other words, in just about any plant. The dimensions of 400 x 350 x 130 mm are compact, so there are no space problems. The entire device weighs 11 kg. The single-phase output power of the B0 variant is 5,000VA.For 220/230V networksSingle-phase emergency power output5.000VA outputCompact deviceHuawei Smart Backup Box-B0 – General SpecificationsOperating temperature range: -20 to +45 °C Relative humidity during operation: 0 % RH to 100 % RH Dimensions (W*H*D) : 400 x 350 x 130 mm Weight: 11 kg Protection class: IP 65Huawei Smart Backup Box-B0 – AC Output (Mains Powered)Mains connection: Single-phase Operating voltage: 220 V / 230 V AC Mains frequency: 50Hz / 60Hz Voltage range AC: 198 V ~ 253 V

    The Huawei Backup Box-B0 for the single-phase household grid ensures that your loads are supplied even in the event of a power failure. In combination with the L1 inverter series,…
  • Substituent

    Smart Dongle WLAN-FE – Huawei

    – – ATENTIE – – SE LIVREAZA DOAR IMPREUNA CU INVERTOR !!Huawei Smart DongleA-05 WLAN-FE – General DataMax. supported devices: 10 Connection interface: USB Ethernet interface: 10/100M Ethernet Installation: Plug-and-play Display: LED – indicator Dimensions (W x H x D): 146 x 48 x 33 mm Weight: 90 g Protection class: IP65 Power consumption (typical): 2.5 W Operating mode: STA Encryption: WPA/WPA2, TKIP/CCMP/AESHuawei Smart DongleA-05 WLAN-FE – WLAN ParametersSupported standards and frequencies: 802.11b/g/n2.412GHz-2.484GHz.Huawei Smart DongleA-05 WLAN-FE – EnvironmentOperating temperature range: -30 to +65 Relative humidity in operation: 5 – 95% RH Storage temperature range: -40 to +70 Max. Operating altitude: 4000 mHuawei Smart DongleA-05 WLAN-FE – Standards ComplianceCertificates: SRRC, CE, RCMHuawei Smart DongleA-05 WLAN-FE – Inverter Compatibility

    - - ATENTIE - - SE LIVREAZA DOAR IMPREUNA CU INVERTOR !!Huawei Smart DongleA-05 WLAN-FE - General DataMax. supported devices: 10 Connection interface: USB Ethernet interface: 10/100M Ethernet Installation: Plug-and-play…
  • Substituent

    Invertor Huawei 8KW – Trifazat – hibrid wlan integrat

    3-phase inverter with 8.800VA power2 independent MPP trackers1 battery connection (Plug and Play) for LUNA2000 ESS 5-15kWhEfficiency up to 98.6%Compatible with module optimizer SUN2000-450W-PCommunication via WLAN / Ethernet and 4G/LTE*Free system monitoring with FusionSolarRS485 for Smart Power Sensor and LUNA2000 ESS 5-15kWhIntegrated AC and DC overvoltage protection TYPE IIIntegrated PID recoveryConvection coolingProtection class IP65Huawei SUN2000-8KTL-M1 – General SpecificationsBetriebstemperaturbereich: -25 ~ +60 °C Relative Betriebsfeuchtigkeit: 0 % RH~100 % RH Betriebshohe: 0 – 4.000 m (Derating > 2.000 m) Kühlung: Konvektionskühlung Anzeige: LED – Anzeige Kommunikation: RS485, WLAN, Ethernet über Smart Dongle-WLAN-FE; 4G/3G/2G über Smart Dongle 4G (optional) Gewicht (inkl. Befestigungswinkel): 17 Kg Abmessungen (inkl. Befestigungswinkel): 525 x 470 x 146.5 mm Schutzart: IP65 Energieverbrauch nachts: < 5,5 W (<10 W, wenn die PID-Wiederherstellungsfunktion aktiviert ist)Huawei SUN2000-8KTL-M1 – Input (DC)Recommended maximum PV power1: 12,000 Wp Max. Input voltage2: 1,100 V Operating voltage range3 : 140 V ~ 980 V Starting voltage: 200 V Rated input voltage: 600 V Max. input current per MPPT: 11 A Max. input current per MPPT: 1,100 V Input current per MPPT: 11 A Max. short-circuit current: 15 A Short circuit current: 15 A Number of MPP trackers: 2 Max. number of inputs per MPPT: 140 V ~ 80 V Number of inputs per MPPT: 1Huawei SUN2000-8KTL-M1 – Input (DC Battery)Compatible battery: HUAWEI Smart String ESS 5kWh – 30kWh Operating voltage range: 600 V ~ 980 V Maximum operating current: 16 A Maximum charging power: 10,000 W Maximum discharging power: 8,800 WHuawei SUN2000-8KTL-M1 – Output (On Grid)Mains connection: three-phase Rated power: 8,000 W Maximum apparent power: 8,800 VA Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE AC mains frequency: 50 Hz / 60 Hz Maximum output current: 13.5 A Adjustable power factor: 0.8 cap. … 0.8 ind. Total harmonic distortion (THD): ≤ 3%Huawei SUN2000-8KTL-M1 – Output (Backup Power via Backup Box-B1)Maximum apparent power: 3,300 VA Rated output voltage: 220 V / 230 V Maximum output current: 15 A Adjustable power factor: 0.8 kap. … 0.8 ind.Huawei SUN2000-8KTL-M1 – Protection and functionDC load break switch: Yes Islanding detection: Yes DC reverse polarity protection: Yes Insulation monitoring: Yes DC overvoltage protection: Yes, compatible with protection type TYPE II according to EN / IEC 61643-11 AC overvoltage protection: Yes, compatible with protection type TYPE II according to EN / IEC 61643-11 Fault current monitoring: Yes AC overcurrent protection: Yes AC short-circuit protection: Yes Arc detection: Yes Inputs for ripple control receivers: Yes Integrated PID recovery: Yes Battery charging from mains possible: YesHuawei SUN2000-8KTL-M1 – Module OptimizerDC MBUS compatible optimizer: SUN2000-450W-PHuawei SUN2000-8KTL-M1 – Standards Compliance (others available upon request)Safety standards: EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116 Mains connection standards: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWAHuawei SUN2000-8KTL-M1 – included in deliveryPV Connector Battery Connector AC Connector Signal Cable Connector Bracket WLAN-FE-DongleHuawei SUN2000-8KTL-M1 – Notes and explanations1 The maximum PV input power of the inverter is 20,000Wp when long strings are designed and fully connected to the SUN2000-450-P power optimizers.2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would likely damage the inverter.3 Any DC input voltage above the operating voltage range may cause faulty operation.

    3-phase inverter with 8.800VA power2 independent MPP trackers1 battery connection (Plug and Play) for LUNA2000 ESS 5-15kWhEfficiency up to 98.6%Compatible with module optimizer SUN2000-450W-PCommunication via WLAN / Ethernet and 4G/LTE*Free…
  • Invertor Huawei 4KW – Trifazat- hibrid wlan integrat

    Invertor Huawei 4KW – Trifazat- hibrid wlan integrat

    Invertor trifazat cu putere de iesire de 4.400 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,3%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare prin WLAN / Ethernet si 4G/LTE*Monitorizare gratuita a sistemului cu FusionSolarRS485 pentru senzor de putere inteligent si LUNA2000 ESS 5-15 kWhProtectie integrata la supratensiune CA si CC TIP IIRecuperare PID integrataRacire prin convectieClasa de protectie IP65 Huawei SUN2000-4KTL-M1 Specificatii generaleInterval de temperatura de functionare: -25~+60°CUmiditate relativa de functionare: 0%RH~100%RHAltitudine de functionare: 0 ~ 4000 m (degradare > 2000 m)Racire: Racire prin convectieAfisaj: Afisaj LEDComunicare: RS485, WiFi, Ethernet prin Smart Dongle WiFi FE; 4G/3G/2G prin Smart Dongle 4G (optional)Greutate (inclusiv suport de montare): 17 kgDimensiuni (inclusiv suport de montare): 525 x 470 x 146,5 mmClasa de protectie: IP65Consum de energie pe timp de noapte: < 5,5 W (<10 W, când functia de recuperare PID este activata)Huawei SUN2000-4KTL-M1 – Intrare (CC)Puterea fotovoltaica maxima recomandata 1 : 6.000 WpTensiune maxima de intrare 2 : 1.100 VDomeniu de tensiune de functionare 3 : 140 V ~ 980 VTensiune de pornire: 200 VTensiune nominala de intrare: 600 VCurent de intrare maxim per MPPT: 11 ACurent de scurtcircuit: 15 ANumar de trackere MPP: 2Numarul de intrari per MPPT: 1Huawei SUN2000-4KTL-M1 – Intrare (baterie CC)Baterie compatibila: HUAWEI Smart String ESS 5kWh – 30kWhGama de tensiune de functionare: 600V ~ 980VCurent maxim de functionare: 16APutere maxima de încarcare:10.000WPutere maxima de descarcare: 4.400W Huawei SUN2000-4KTL-M1 – Iesire (On – grid)Conexiune la retea: trifazatPutere nominala: 4.000 WPutere aparenta maxima: 4.400 VA nominalTensiune de iesire: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PEFrecventa liniei AC: 50 Hz / 60 HzCurent maxim de iesire: 6,8 AFactor de putere reglabil: 0,8 cap. … 0,8 ind.Distorsiunea armonica totala (THD): ≤ 3% Huawei SUN2000-4KTL-M1 – Iesire (alimentare de rezerva prin Backup Box-B1)Putere aparenta maxima: 3.300 VATensiune nominala de iesire: 220 V / 230 VCurent maxim de iesire: 15 AFactor de putere reglabil: 0,8 cap. … 0,8 ind. Huawei SUN2000-4KTL-M1 – functionare si protectieComutator CCDetectarea reteleiProtectie la inversia de polaritate CCMonitorizarea izolatieiProtectie la supratensiune CC, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Protectie la supratensiune CA, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Monitorizare curent rezidualProtectie la supracurent CAProtectie la scurtcircuit CADetectare arcReceptor de control al ondulatiei pe intrariRecuperare PID instalataÎncarcarea bateriei de la retea posibilaHuawei SUN2000-4KTL-M1 – modul de optimizareOptimizator compatibil CC MBUS: SUN2000-450W-P Huawei SUN2000-4KTL-M1 – Respectarea standardelor (altele disponibile la cerere)Standarde de siguranta: EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116 Standarde de conectare la retea: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWAHuawei SUN2000-4KTL-M1 – Continut cutieConector PV Conector baterie Conector AC Conector cablu de semnal Suport WiFi Dispozitiv FEHuawei SUN2000-4KTL-M1 – Note1 Puterea maxima de intrare PV a invertorului este de 20.000 Wp atunci când instalatiile sunt proiectate si complet conectate cu optimizatoarele de putere SUN2000-450-P.2 Tensiunea maxima de intrare este limita superioara a tensiunii continue. Orice tensiune de intrare CC mai mare ar putea deteriora invertorul.3 Orice tensiune de intrare CC peste intervalul de tensiune de functionare poate provoca o functionare eronata.

    Invertor trifazat cu putere de iesire de 4.400 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,3%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare…
  • Modul pentru Baterii Huawei Luna2000

    Modul pentru Baterii Huawei Luna2000

    Modulul de control al puterii LUNA2000-5KW-C0 este compatibil cu acumulatorii Huawei Luna si este proiectat sa mentina cea mai buna stare de functionare si sanatate a acestora.Modulul regleaza timpii si energia de incarcare si descarcare a acumulatorilor in functie de curentul furnizat de catre invertor si de necesarul de putere pentru consumatori, atunci cand nu exista curent electric de la retea sau atunci cand panourile fotovoltaice nu furnizeaza destul curent electric.Acest produs functioneaza impreuna cu Acumulatorul Huawei LUNA2000-5-EOLungime (mm)670Latime (mm)240Adancime (mm)150Greutate (kg)12

    Modulul de control al puterii LUNA2000-5KW-C0 este compatibil cu acumulatorii Huawei Luna si este proiectat sa mentina cea mai buna stare de functionare si sanatate a acestora.Modulul regleaza timpii si…
  • Substituent

    Smart meter 380V 250A – trifazic – Huawei

    – – ATENTIE – – SE LIVREAZA DOAR IMPREUNA CU INVERTOR !!Senzor de putere Huawei DTSU666-H trifazat pentru utilizarea în sistemele de energie solara. Componenta proceseaza o tensiune de 176 pâna la 288 de volti si areun consum de energie foarte scazut, mai mic de un watt. Instalarea este simpla, usoara si fara efort. Odata ce senzorul este integrat, acesta afiseaza datele de performanta prin intermediul ecranului LCD încorporat si poate fi, de asemenea, operat fara efort prin intermediul acestuia. În plus, senzorul inteligent de putere Huawei DTSU666-H accepta comunicarea prin RS485, astfel încât poate fi citit si de la distanta. Utilizeaza protocolul de comunicare Modbus RTU în acest scop.O alta caracteristica remarcabila a acestui contor este precizia sa. Precizia de masurare a tensiunii este de +/-0,5 %, pentru frecventa fluctuatia este de 0,01 Hz, curentul, puterea si energia sunt masurate de senzor cu o abatere maxima de +/-1 %. Astfel senzorul este clasificat în clasa de precizie >1. De asemenea, trebuie mentionate celelalte date tehnice. Senzorul este gazduit într-o carcasa de 100 x 72 x 65,5 mm si cântareste 1,5 kg (cu tot cu cabluri). Acest lucru permite utilizarea cu economie de spatiu. Temperatura posibila de functionare este cuprinsa între -25 °C si +60 °C iar contorul tolereaza o umiditate relativa de 5 % pâna la 95 %.Curentul poate fi masurat pâna la 250 A.Livrarea include trei transformatoare de curent pliabile cu lungimea cablului de 5 m si un cablu RS485 cu lungimea de 10 m.Senzor inteligent de putere trifazatTensiune 176-288 VoltiClasa de precizie > 1Operare usoara prin afisaj LCDConsum de energie ≤1 WComunicare prin RS485 Senzor de putere inteligent Huawei DTSU666-H – Date generaleInterval de temperatura de functionare: -25°C ~ +60°CUmiditate relativa: 5 % RH~ 95 % RHDimensiune (L x A x A): 100 x 72 x 65,5 mmTip de montare: sina DIN35Greutate (inclusiv cablu): 1,5 kgTip sistem de alimentare: 3P4W (trifazat)Tensiune de intrare: 176 VAC~288 VAC (faza / N)Consum de energie: ≤ 1 WComunicare: RS485Senzor de putere inteligent Huawei DTSU666-H – ComunicareInterfata: RS485Rata de transmisie: 9.600 bpsProtocol de comunicare: Modbus-RTUSenzor de putere inteligent Huawei DTSU666-H – Domeniu de masurareTensiune de linie faza-faza: 304 Vac ~ 499 VacTensiune de faza: 176 Vac ~ 288 VacCurent: 0 ~ 250 ASenzor de putere inteligent Huawei DTSU666-H – Precizia masuratorilorTensiune: ±0,5 %Curent/ Putere/ Energie: ±1 %Frecventa: ±0,01 HzSenzor de putere inteligent Huawei DTSU666-H – Conditii de mediuTemperatura de functionare: -25 ~ +60 Temperatura de depozitare: -40 ~ +70 Umiditate de functionare: 5%RH ~ 95%RH (fara condensare)Senzor inteligent de putere Huawei DTSU666-H – inclus în livrare3x transformator de curent pliabil (lungime cablu de 5 m) RS485 (lungime cablu 10 m)

    - - ATENTIE - - SE LIVREAZA DOAR IMPREUNA CU INVERTOR !!Senzor de putere Huawei DTSU666-H trifazat pentru utilizarea în sistemele de energie solara. Componenta proceseaza o tensiune de 176…
  • Substituent

    Invertor Huawei 5KW – Monofazat- hibrid – Wifi integrat

    1-phase inverter with 5,500VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage protectionHuawei SUN2000-5KTL-L1 – General SpecificationsOperating temperature range: -25 ~ +60 °C Relative operating humidity: 0 % RH~100 % RH Operating altitude: 0 – 4,000 m (derating > 2,000 m) Cooling: Natural convection Display: Status LEDs Communication: RS485, WLAN, Ethernet*, 4G/3G/2G* Weight (incl. mounting bracket): 12 Kg Dimensions (incl. mounting bracket): 365 x 365 x 156 mm Protection class: IP65Huawei SUN2000-5KTL-L1 – Input DCRecommended maximum PV power1: 7,500 Wp Max. Input voltage2: 600 V Starting voltage: 100 V Full MPPT voltage range: 90 V ~ 560 V Rated input voltage : 360 V Max. Input current per MPPT: 12.5 A Max. short-circuit current: 18 A Short circuit current: 18 A Number of MPP trackers: 2 Max. number of inputs: 2 Number of inputs: 2Huawei SUN2000-5KTL-L1 – Output ACMains connection: Single-phase Rated power5: 5,000 W Max. Apparent power6: 5,500 VA Rated output voltage: 220 V / 230 V / 240 V AC – Mains frequency: 50 Hz / 60 Hz Max. Output current7: 25 A Adjustable power factor: 0.8 kap. … 0.8 ind. Total harmonic distortion (THD): ≤ 3%Huawei SUN2000-5KTL-L1 – EfficiencyMax. Efficiency: 98.4 % European efficiency: 97.8 %Huawei SUN2000-5KTL-L1 – Protection devicesDC load break switch: Yes DC reverse polarity protection: Yes AC overcurrent protection: Yes AC short circuit protection: Yes Overheat protection: Yes Arc fault protection: Yes DC overvoltage protection4: Yes AC overvoltage protection4: Yes DC insulation monitoring: Yes Residual current monitoring: YesHuawei SUN2000-5KTL-L1 – Battery CompatibilityCompatible Battery: LG Chem RESU 7H_R / 10H_R Voltage Range: 350 ~ 450 Vdc Max. Current: 10 A Max. Discharge Power: 5,000 WCompatible Battery: HUAWEI Smart ESS Battery 5 kWh – 30 kWh 1 Operating voltage range: 350 ~ 560 VDC Max. Operating current: 15 A Max. Charging power3: 5.000 W Max. Discharge power: 5,000 WHuawei SUN2000-5KTL-L1 – Standards and SafetyEN/IEC 62109-1, EN/IEC 62109-2Huawei SUN2000-5KTL-L1 – Power supply conditionsG98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777.2, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116Further information on conformity to standards is available on request.Huawei SUN2000-5KTL-L1 – Optimizer CompatibilityDC MBUS compatible optimizer: SUN2000-450W-PHuawei SUN2000-5KTL-L1 – included in deliveryPV Connector Battery Connector AC Connector Signal Cable Connector Antenna BracketHuawei SUN2000-5KTL-L1 – Notes and explanations1 The maximum PV input power of the inverter is 10000 Wp when long strings are designed and fully connected to the SUN2000-450W-P power optimizers.2 The maximum upper limit for input voltage and operating voltage is reduced to 495 V when the inverter is connected and operating with the LG battery.3 2500 W @ 5kWh HUAWEI ESS Battery4 compatible with protection type TYPE II according to EN / IEC 61643-115 AS4777.2: 4,991W.6 AS4777.2: 4,999VA / C10/11: 5,000VA.7 AS4777.2: 21.7A.* via WLAN-FE dongle / 4G dongle (optional)

    1-phase inverter with 5,500VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage…
  • Invertor Huawei 4KW – Monofazat- hibrid – Wifi integrat

    Invertor Huawei 4KW – Monofazat- hibrid – Wifi integrat

    1-phase inverter with 4,400VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage protectionHuawei SUN2000-4KTL-L1 – General SpecificationsOperating temperature range: -25 ~ +60 °C Relative operating humidity: 0 % RH~100 % RH Operating altitude: 0 – 4,000 m (derating > 2,000 m) Cooling: Natural convection Display: Status LEDs Communication: RS485, WLAN, Ethernet*, 4G/3G/2G* Weight (incl. mounting bracket): 12 Kg Dimensions (incl. mounting bracket): 365 x 365 x 156 mm Protection class: IP65Huawei SUN2000-4KTL-L1 – Input DCRecommended maximum PV power: 6,000 Wp Max. Input voltage: 600 V Starting voltage: 100 V Full MPPT voltage range: 90 V ~ 560 V (1) Rated input voltage: 360 V Max. Input Current per MPPT: 12.5 A Max. Short-circuit current: 18 A Number of MPP trackers: 2 Max. number of inputs: 2 Number of inputs: 2Huawei SUN2000-4KTL-L1 – Output ACMains connection: Single phase Rated power: 4,000 W Max. Apparent power: 4,400 VA Rated output voltage: 220 V / 230 V / 240 V AC – Mains frequency: 50 Hz / 60 Hz Max. output current: 20 A Output current: 20 A Adjustable power factor: 0.8 kap. … 0.8 ind. Distortion factor (THD): ≤ 3%Huawei SUN2000-4KTL-L1 – EfficiencyMax. Efficiency: 98.4 % European efficiency: 97.5 %Huawei SUN2000-4KTL-L1 – Protective devicesDC load break switch: Yes DC reverse polarity protection: Yes AC overcurrent protection: Yes AC short circuit protection: Yes Overheat protection: Yes Arc fault protection: Yes DC overvoltage protection: Yes AC overvoltage protection: Yes DC insulation monitoring: Yes Residual current monitoring: YesHuawei SUN2000-4KTL-L1 – Battery CompatibilityCompatible Battery: LG Chem RESU 7H_R / 10H_R Voltage Range: 350 ~ 450 Vdc Max. Current: 10 A Max. Discharge Power: 4,400 WCompatible Battery: HUAWEI Smart ESS Battery 5 kWh – 30 kWh 1 Operating voltage range: 350 ~ 560 VDC Max. Operating current: 15 A Max. Charging power3: 5.000 W Max. Discharge power: 4,400 WHuawei SUN2000-4KTL-L1 – Standards and SecurityEN/IEC 62109-1, EN/IEC 62109-2Huawei SUN2000-4KTL-L1 – Power supply conditionsG98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777.2, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116Further information on conformity to standards is available on request.Huawei SUN2000-4KTL-L1 – Optimizer CompatibilityDC MBUS compatible optimizer: SUN2000-450W-PHuawei SUN2000-4KTL-L1 – included in deliveryPV Connector Battery Connector AC Connector Signal Cable Connector Antenna Bracket

    1-phase inverter with 4,400VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage…
  • Substituent

    Suport perete pt Baterii LUNA2000

    Gasesti la noi Suport perete pt Baterii LUNA2000 pret excelent Online Acum Suport perete pt Baterii LUNA2000 Modalități Plata si Livrare Platesti online cu cardul sau la destinație ramburs in funcție de produs. Cost livrare: va fi calculat în pagina de comanda după ce ați dat click pe butonul „catre magazin” și adaugă în coș…

    Gasesti la noi Suport perete pt Baterii LUNA2000 pret excelent Online Acum Suport perete pt Baterii LUNA2000 Modalități Plata si Livrare Platesti online cu cardul sau la destinație ramburs in…
  • Invertor Huawei 5KW – Trifazat – hibrid wlan integrat

    Invertor Huawei 5KW – Trifazat – hibrid wlan integrat

    Invertor trifazat cu putere de iesire de 5.500 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,4%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare prin WLAN / Ethernet si 4G/LTE*Monitorizare gratuita a sistemului cu FusionSolarRS485 pentru senzor de putere inteligent si LUNA2000 ESS 5-15 kWhProtectie integrata la supratensiune CA si CC TIP IIRecuperare PID integrataRacire prin convectieClasa de protectie IP65 Huawei SUN2000-5KTL-M1 specificatii generaleInterval de temperatura de functionare: -25~+60°CUmiditate relativa de functionare: 0%RH~100%RHAltitudine de functionare: 0 ~ 4000 m (degradare > 2000 m)Racire: Racire prin convectieAfisaj: Afisaj LEDComunicare: RS485, WiFi, Ethernet prin Smart Dongle WiFi FE; 4G/3G/2G prin Smart Dongle 4G (optional)Greutate (inclusiv suport de montare): 17 kgDimensiuni (inclusiv suport de montare): 525 x 470 x 146,5 mmClasa de protectie: IP65Consum de energie pe timp de noapte: < 5,5 W (<10 W, când functia de recuperare PID este activata) Huawei SUN2000-5KTL-M1 – Intrare (CC)Puterea fotovoltaica maxima recomandata 1 : 7.500 WpTensiune maxima de intrare 2 : 1.100 VDomeniu de tensiune de functionare 3 : 140 V ~ 980 VTensiune de pornire: 200 VTensiune nominala de intrare: 600 VCurent de intrare maxim per MPPT: 11 ACurent de scurtcircuit: 15 ANumar de trackere MPP: 2Numarul de intrari per MPPT: 1 Huawei SUN2000-5KTL-M1 – Intarre (baterie CC)Baterie compatibila: HUAWEI Smart String ESS 5kWh – 30kWhGama de tensiune de functionare: 600V ~ 980VCurent maxim de functionare: 16APutere maxima de încarcare:10.000WPutere maxima de descarcare: 5.500WHuawei SUN2000-5KTL-M1 – Iesire (On – grid)Conexiune la retea: trifazatPutere nominala: 5.000 WPutere aparenta maxima: 5.500 VA nominalTensiune de iesire: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PEFrecventa liniei AC: 50 Hz / 60 HzCurent maxim de iesire: 8,5 AFactor de putere reglabil: 0,8 cap. … 0,8 ind.Distorsiunea armonica totala (THD): ≤ 3%Huawei SUN2000-5KTL-M1 – Iesire (alimentare de rezerva prin Backup Box-B1)Putere aparenta maxima: 3.300 VATensiune nominala de iesire: 220 V / 230 VCurent maxim de iesire: 15 AFactor de putere reglabil: 0,8 cap. … 0,8 ind. Huawei SUN2000-5KTL-M1 – functionare si protectieComutator CCDetectarea reteleiProtectie la inversia de polaritate CCMonitorizarea izolatieiProtectie la supratensiune CC, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Protectie la supratensiune CA, compatibil cu tipul de protectie TIP II conform EN / IEC 61643-11Monitorizare curent rezidualProtectie la supracurent CAProtectie la scurtcircuit CADetectare arcReceptor de control al ondulatiei pe intrariRecuperare PID instalataÎncarcarea bateriei de la retea posibila Huawei SUN2000-5KTL-M1 – optimizator modulOptimizator compatibil CC MBUS: SUN2000-450W-P Huawei SUN2000-3KTL-M1 – Respectarea standardelor (altele disponibile la cerere)Standarde de siguranta: EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116Standarde de conectare la retea: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWAHuawei SUN2000-3KTL-M1 – Continutul cutieiConector PV Conector baterie Conector AC Conector cablu de semnal Suport WiFi Dispozitiv FE

    Invertor trifazat cu putere de iesire de 5.500 VA2 trackere MPP independente1 conexiune baterie (Plug and Play) pentru LUNA2000 ESS 5-15kWhEficienta de pâna la 98,4%Compatibil cu optimizatorul de module SUN2000-450W-PComunicare…
  • Substituent

    Invertor Huawei 6KW – Monofazat- hibrid – Wifi integrat

    1-phase inverter with 5,500VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage protectionHuawei SUN2000-6KTL-L1 – General SpecificationsOperating temperature range: -25 ~ +60 °C Relative operating humidity: 0 % RH~100 % RH Operating altitude: 0 – 4,000 m (derating > 2,000 m) Cooling: Natural convection Display: Status LEDs Communication: RS485, WLAN, Ethernet*, 4G/3G/2G* Weight (incl. mounting bracket): 12 Kg Dimensions (incl. mounting bracket): 365 x 365 x 156 mm Protection class: IP65Huawei SUN2000-6KTL-L1 – Input DCRecommended maximum PV power: 9,000 Wp Max. Input voltage: 600 V Starting voltage: 100 V Full MPPT voltage range2: 90 V ~ 560 V Rated input voltage : 360 V Max. Input current per MPPT: 12.5 A Max. short-circuit current: 18 A Short circuit current: 18 A Number of MPP Trackers: 2 Max. Number of inputs: 2Huawei SUN2000-6KTL-L1 – Output ACMains connection: Single-phase Rated power: 6,000 W Max. Apparent power: 6,000 VA Rated output voltage: 220 V / 230 V / 240 V AC – Mains frequency: 50 Hz / 60 Hz Max. Output current: 27,3 A Adjustable power factor: 0.8 cap. … 0.8 ind. Total harmonic distortion (THD): ≤ 3%Huawei SUN2000-6KTL-L1 – EfficiencyMax. Efficiency: 98.4 % European efficiency: 97.8 %Huawei SUN2000-6KTL-L1 – Protection devicesDC load break switch: Yes DC reverse polarity protection: Yes AC overcurrent protection: Yes AC short circuit protection: Yes Overheat protection: Yes Arc fault protection: Yes DC overvoltage protection4: Yes AC overvoltage protection4: Yes DC insulation monitoring: Yes Residual current monitoring: YesHuawei SUN2000-6KTL-L1 – Battery CompatibilityCompatible Battery: LG Chem RESU 7H_R / 10H_R Voltage Range: 350 ~ 450 Vdc Max. Current: 10 A Max. Discharge Power: 5,000 WCompatible Battery: HUAWEI Smart ESS Battery 5 kWh – 30 kWh 1 Operating voltage range: 350 ~ 560 VDC Max. Operating current: 15 A Max. Charging power: 5.000 W Max. Discharge power: 5,000 WHuawei SUN2000-6KTL-L1 – Standards and SecurityEN/IEC 62109-1, EN/IEC 62109-2Huawei SUN2000-6KTL-L1 – Power supply conditionsG98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777.2, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116Further information on conformity to standards is available on request.Huawei SUN2000-6KTL-L1 – Optimizer CompatibilityDC MBUS compatible optimizer: SUN2000-450W-PHuawei SUN2000-6KTL-L1 – included in deliveryPV Connector Battery Connector AC Connector Signal Cable Connector Antenna Bracket

    1-phase inverter with 5,500VA output2 independent MPP trackers1 battery connection (plug and play)Efficiency up to 98.4%Communication via WLAN, Ethernet* and 4G*RS485 for Smart Power Sensor and BatteryAC and DC overvoltage…
  • Substituent

    Smart logger – Huawei 3000A01EU

    Huawei SmartLogger 3000A01EU permite gestionarea a maximum 80 de dispozitive. Instalarea si functionarea dispozitivului pentru jurnal de date sunt foarte simple. Sunt posibile diferite optiuni pentru integrarea Huawei SmartLogger 3000A01EU. Dispozitivul accepta comunicarea prin RS485, precum si prin Ethernet si 4G. Serverul web integrat, face din logger o parte esentiala a unui sistem fotovoltaic inteligent.Instalarea la fata locului este simpla si sigura. Se poate face fie prin aplicatia Huawei Solar Fusion (prin Wi-Fi), fie printr-un notebook – în orice caz, punerea în functiune se finalizeaza rapid. Imediat dupa configurare, utilizatorii au acces la numeroase optiuni de control inteligent pentru a creste eficienta si a utiliza electricitatea cu întelepciune. Deosebit de practic: Afisajul LED de pe carcasa arata starea curenta. Dispozitivul este protejat împotriva intemperiilor si a influentelor mediului conform IP20. Poate fi operat într-un interval de la -40 °C la +60 °C – cu alte cuvinte, în aproape orice sistem. Dimensiunile de 225 x 160 x 44 mm permit amplasarea dispozitivului în orice spatiu. Întregul dispozitiv cântareste 2 kg. Majoritatea accesoriilor pentru montare sunt incluse în pachetul de livrare, de exemplu antena 4G si adaptorul de alimentare. Consumul de energie tipic este de 8 W, cu maximum de 15 W.Max. 80 de dispozitive gestionabileInstalare prin FusionSolarApp sau notebookServer web integratComunicare prin RS485, Ethernet si 4GHuawei SmartLogger 3000A01EU – Date generaleInterval de temperatura de functionare: -40 ~ +60 °CUmiditate relativa: 5 % RH~ 95 % RHAltitudine de operare: max. 4.000 mConsum de energie: 8 W, max. 15 WDisplay: 3 x LED-uriComunicare: RS485, Ethernet, 2G/3G/4GGreutate: 2 KgDimensiuni (fara suporturi de montare si antena): 225 x 160 x 44 mmClasa de protectie: IP20Huawei SmartLogger 3000A01EU – Interfete de comunicareWAN: 1 x WAN 10 / 100 / 1.000 MbpsLAN: 1 x LAN 10 / 100 / 1.000 MbpsRS485: 3 x COM 1200 / 2400 / 4800 / 9600 / 19200 / 115200 bps, 1000 mLTE (FDD): B1, B2, B3, B4, B5, B7, B8, B20DC-HSPA+/HSPA+/HSPA/UMTS: 850/900/1900/2100 MHzGSM/GPRS/EDGE: 850/900/1800/1900 MHz 2Intrare / Iesire digitala / analogica: 4 x DI, 2 x DO, 4 x AIDO activa: 12V, 100mA (conexiune cu releu, senzor).Huawei SmartLogger 3000A01EU – Protocol de comunicareEthernet: Modbus TCP, IEC 60870-5-104 RS485: Modbus RTU, IEC 60870-5-103 (standard), DL / T645Huawei SmartLogger 3000A01EU – Gestionarea dispozitivelorNumar maxim de dispozitive pe care le gestioneaza: 80Huawei SmartLogger 3000A01EU – ComunicareDisplay: LED-uriWEB: Server web integratUSB: 1 x USB 2.0APP: Comunicare prin WLAN pentru punere în functiuneHuawei SmartLogger 3000A01EU – Sursa de alimentareAlimentare AC: 100 V~240 V, 50 Hz / 60 HzAlimentare DC: 12 V / 24 VConsum de energie: de obicei 8 W, max. 15 WHuawei SmartLogger 3000A01EU – inclus în livrareCablu de alimentare 230VAdaptor de retea 12VDC + suportCablu de corectieantena 4GConector pentru contacte DI/AI/DOConector pentru RS485

    Huawei SmartLogger 3000A01EU permite gestionarea a maximum 80 de dispozitive. Instalarea si functionarea dispozitivului pentru jurnal de date sunt foarte simple. Sunt posibile diferite optiuni pentru integrarea Huawei SmartLogger 3000A01EU.…